, ,

Vapor Shark Hedron 200W Mod

The new collab by Wismec and Vapor Shark.

Vapor Shark Hedron 200W Mod

In a collaborative effort between Wismec and Vapor Shark, the Hedron 200W Mod was born.  What’s so special about this device is that it’s the first Vapor Shark device capable of delivering 200 watts of power while using three 18650 batteries.  The Hedron makes use of Wismec’s RX chipset, which vaping consumers have come to love and adore due to its high power output and its “DNA-like” consistency.

Starting off, the Hedron 200W Mod offers a unique polygonal design, featuring a modern and sleek appearance.  It holds three 18650 batteries, and the battery compartment is secured with a magnetized back cover.  The Hedron boasts a three button control face, while the larger firing button features Vapor Shark’s signature light ring around the button.  Include on the control face is a large OLED screen that has a vertical stack.  As for its power, as mention, the Hedron 200W Mod comes equipped with the RX Chipset, and that supplies the capability of reaching up to 200 watts of vaping power.  While in its wattage mode, users can fire atomizers as low as 0.1Ω, and using its temperature control feature, users can fire down as low as 0.06Ω.  In addition to its on-board temperature control mode, users will be able to take advantage of Titanium, Ni200 Nickel, or Stainless Steel 316 coils, as well as using its TCR mode.  Furthermore, there are other notable features including the ability to upgrade the chipsets firmware in the future, stainless steel 510 threading with a gold plated spring-loaded contact, and a slew of built-in safety features.

GET THE VAPOR SHARK HEDRON MOD HERE »

Vapor Shark Hedron Mod Features:

  • Requires Three 18650 Batteries (Sold Separately)
  • Utilizes The Wismec RX Chipset
  • Magnetized Back Door
  • Gold Plated Spring Loaded Contacts
  • Wattage Range: 1 to 200W
  • Minimum Resistance (VW): 0.1 to 3.5 ohms
  • Minimum Resistance (TC): 0.06 to 1.0 ohm
  • Temperature Control
  • TC Modes: Titanium, Ni200 Nickel, Stainless Steel 316, TCR
  • Temp Range: 200 to 600 Degrees
  • Atomizer Resistance Lock
  • Upgradeable Firmware
  • Large OLED Screen (Vertical Stack)
  • Unique Polygonal Design
  • Vapor Shark Signature Light Ring
  • Stainless Steel 510
  • Gold Plated Spring Loaded Contact
  • Safety Features
    • No Atomizer
    • Atomizer Low
    • Atomizer Short Circuit
    • Temperature Alert
    • 10 Second Overdraw
    • Weak Battery
    • Low Power
    • USB and Battery Imbalance Protection
  • Dimensions: 50mm by 40mm by 86mm

Product Includes:

  • 1x Vapor Shark Hedron 200W Box Mod
  • 1x Micro-USB Cable
  • Quick Setting Information Card

What do you think?

1 point
Upvote Downvote

Total votes: 1

Upvotes: 1

Upvotes percentage: 100.000000%

Downvotes: 0

Downvotes percentage: 0.000000%

One Ping

  1. Pingback:

Leave a Reply

Your email address will not be published. Required fields are marked *